summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/projects/img/reflow-workshop/hotplate_sat.jpgbin0 -> 1727355 bytes
-rw-r--r--docs/projects/img/reflow-workshop/people_who.jpgbin0 -> 59105 bytes
-rw-r--r--docs/projects/img/reflow-workshop/product_sat.jpgbin0 -> 1416098 bytes
-rw-r--r--docs/projects/img/reflow-workshop/qfn32_paste_sat.jpgbin0 -> 399508 bytes
-rw-r--r--docs/projects/reflow-workshop.md44
5 files changed, 44 insertions, 0 deletions
diff --git a/docs/projects/img/reflow-workshop/hotplate_sat.jpg b/docs/projects/img/reflow-workshop/hotplate_sat.jpg
new file mode 100644
index 0000000..25a5ed0
--- /dev/null
+++ b/docs/projects/img/reflow-workshop/hotplate_sat.jpg
Binary files differ
diff --git a/docs/projects/img/reflow-workshop/people_who.jpg b/docs/projects/img/reflow-workshop/people_who.jpg
new file mode 100644
index 0000000..ff8645b
--- /dev/null
+++ b/docs/projects/img/reflow-workshop/people_who.jpg
Binary files differ
diff --git a/docs/projects/img/reflow-workshop/product_sat.jpg b/docs/projects/img/reflow-workshop/product_sat.jpg
new file mode 100644
index 0000000..26916d1
--- /dev/null
+++ b/docs/projects/img/reflow-workshop/product_sat.jpg
Binary files differ
diff --git a/docs/projects/img/reflow-workshop/qfn32_paste_sat.jpg b/docs/projects/img/reflow-workshop/qfn32_paste_sat.jpg
new file mode 100644
index 0000000..df3d818
--- /dev/null
+++ b/docs/projects/img/reflow-workshop/qfn32_paste_sat.jpg
Binary files differ
diff --git a/docs/projects/reflow-workshop.md b/docs/projects/reflow-workshop.md
index e373388..7539e49 100644
--- a/docs/projects/reflow-workshop.md
+++ b/docs/projects/reflow-workshop.md
@@ -561,3 +561,47 @@ because the kitten hisses when reset.
To my disappointment I only ordered 100 LEDs, which is _barely_ enough.
And to an electronic engineer _barely_ enough is not enough. We have to
keep a redundancy, so I ordered 200 more.
+
+## 2023-05-13, Saturday
+
+Just finished the first session and I am so fucking exhausted. Three
+hours, working nonstop. I forgot where I left my bag so I couldn't even
+show the slides I made.
+
+Long story short, we instructed 8 terrified beginners how to do reflow.
+Out of all participants, one managed perfect paste on the first try; most
+made it in three.
+
+Here's some of the jobs that made me go "hmm that's not bad":
+
+![Four decent QFN32 paste jobs](img/reflow-workshop/qfn32_paste_sat.jpg)
+
+We began toastin' at exactly the two hour mark.
+
+![Two PCBs on a hotplate](img/reflow-workshop/hotplate_sat.jpg)
+
+▲ One core, two threads
+
+![Fully assembled board](img/reflow-workshop/product_sat.jpg)
+
+▲ Typical board right after heating
+
+I then spent like half an hour manually fixing shorts, reinforcing the
+battery holder, etc. Everyone's electronic kitten purrs and hisses, but
+not every LED turns on. It could be a fault in the touch sensing area,
+MCU, resistor pack, or the LED itself. I did not have the time to diagonse
+one by one. On one board this happened on the tail, which makes the kitten
+immune to tail pats, and consequently really tame and hardly hisses.
+
+Everyone got their product at 21:something and I cleaned up the place and
+wiped every tool until minutes to 22. It's a miracle we finished the whole
+thing before 22:00, especially when the staff is made up of three
+ex-terrified beginners, two of whom literally learned reflow 48 hours ago.
+
+![wojak meme. people who come to workshops: upper class noblepeople;
+people who make workshops: exhaused, messy hair, drinking
+Monster](img/reflow-workshop/people_who.jpg)
+
+▲ This is honestly how I feel
+
+Later, I found my bag in another room.