clang format, git config, catspeak, cava and neofetch from banditoHEADmaster

5 files changed, 1088 insertions, 3 deletions

diff --git a/.clang-format b/.clang-format
new file mode 100644
index 0000000..2ebbd2f
--- /dev/null
+++ b/.clang-format
@@ -0,0 +1,21 @@
+---
+AlignConsecutiveDeclarations: 'true'
+AlwaysBreakAfterDefinitionReturnType: None
+IndentCaseLabels: 'false'
+IndentWidth: '8'
+Language: Cpp
+PointerAlignment: Right
+ReflowComments: 'true'
+SpaceAfterLogicalNot: 'false'
+SpaceAfterTemplateKeyword: 'true'
+SpaceBeforeAssignmentOperators: 'true'
+SpaceBeforeParens: ControlStatements
+SpaceInEmptyParentheses: 'false'
+SpacesInAngles: 'false'
+SpacesInParentheses: 'false'
+SpacesInSquareBrackets: 'false'
+Standard: Cpp11
+TabWidth: '8'
+UseTab: ForIndentation
+
+...
diff --git a/.gitconfig b/.gitconfig
index 5411f31..467a402 100644
--- a/.gitconfig
+++ b/.gitconfig
@@ -7,10 +7,26 @@
 	a = add
 	co = checkout
 	br = branch
-    st = status
-    p = push
-    dc = diff --cached
+	st = status
+	p = push
+	dc = diff --cached
+	rs = restore --staged
+[sendemail]
+	smtpserver = smtp.migadu.com
+	smtpuser = fkfd@fkfd.me
+	smtppass = [REDACTED]
+	smtpencryption = ssl
+	smtpserverport = 465
 [url "https://invent.kde.org/"]
 	insteadOf = kde:
 [url "ssh://git@invent.kde.org/"]
 	pushInsteadOf = kde:
+[init]
+	defaultBranch = main
+[pull]
+	rebase = false
+[filter "lfs"]
+	smudge = git-lfs smudge -- %f
+	process = git-lfs filter-process
+	required = true
+	clean = git-lfs clean -- %f
diff --git a/catspeak/list.txt b/catspeak/list.txt
new file mode 100644
index 0000000..f047d18
--- /dev/null
+++ b/catspeak/list.txt
@@ -0,0 +1,19 @@
+meow
+meow,
+meow.
+meow?
+meow!
+nya~
+*yawn*
+blep
+blep.
+blep?
+mlem
+purr
+meep?
+meep.
+meep!
+me hungy
+food?
+feed me hooman
+喵
diff --git a/cava/config b/cava/config
new file mode 100644
index 0000000..910565a
--- /dev/null
+++ b/cava/config
@@ -0,0 +1,165 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+autosens = 1
+overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa', 'fifo', 'sndio' or 'shmem'
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+; method = pulse
+; source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+; sample_rate = 44100
+; sample_bits = 16
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses' or 'raw'.
+# 'noncurses' uses a custom framebuffer technique and draws only changes
+# from frame to frame. 'ncurses' is default if supported
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+; method = ncurses
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+; channels = stereo
+; mono_option = average
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# ncurses output method and a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# if supported, ncurses mode will be forced on if user defined colors are used.
+# default is to keep current terminal color
+; background = default
+; foreground = default
+
+# Gradient mode, only hex defined colors (and thereby ncurses mode) are supported,
+# background must also be defined in hex  or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+gradient = 1
+gradient_count = 8
+gradient_color_1 = '#59cc33'
+gradient_color_2 = '#80cc33'
+gradient_color_3 = '#a6cc33'
+gradient_color_4 = '#cccc33'
+gradient_color_5 = '#cca633'
+gradient_color_6 = '#cc8033'
+gradient_color_7 = '#cc5933'
+gradient_color_8 = '#cc3333'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+; integral = 77
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+; monstercat = 0
+; waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble
diff --git a/neofetch/config.conf b/neofetch/config.conf
new file mode 100644
index 0000000..cdba4c6
--- /dev/null
+++ b/neofetch/config.conf
@@ -0,0 +1,864 @@
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Resolution" resolution
+    info "DE" de
+    info "WM" wm
+    info "WM Theme" wm_theme
+    info "Theme" theme
+    info "Icons" icons
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+
+    # info "GPU Driver" gpu_driver  # Linux/macOS only
+    # info "CPU Usage" cpu_usage
+    # info "Disk" disk
+    # info "Battery" battery
+    # info "Font" font
+    # info "Song" song
+    # [[ "$player" ]] && prin "Music Player" "$player"
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Locale" locale  # This only works on glibc systems.
+
+    info cols
+}
+
+# Title
+
+
+# Hide/Show Fully qualified domain name.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --title_fqdn
+title_fqdn="off"
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'tiny', 'off'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'tiny', 'off'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# tiny: '2d 10h 3m'
+# off:  '2 days, 10 hours, 3 minutes'
+uptime_shorthand="on"
+
+
+# Memory
+
+
+# Show memory pecentage in output.
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --memory_percent
+#
+# Example:
+# on:   '1801MiB / 7881MiB (22%)'
+# off:  '1801MiB / 7881MiB'
+memory_percent="off"
+
+# Change memory output unit.
+#
+# Default: 'mib'
+# Values:  'kib', 'mib', 'gib'
+# Flag:    --memory_unit
+#
+# Example:
+# kib  '1020928KiB / 7117824KiB'
+# mib  '1042MiB / 6951MiB'
+# gib: ' 0.98GiB / 6.79GiB'
+memory_unit="mib"
+
+
+# Packages
+
+
+# Show/Hide Package Manager names.
+#
+# Default: 'tiny'
+# Values:  'on', 'tiny' 'off'
+# Flag:    --package_managers
+#
+# Example:
+# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
+# tiny: '908 (pacman, flatpak, snap)'
+# off:  '908'
+package_managers="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="off"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="off"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="off"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+# Public IP timeout.
+#
+# Default: '2'
+# Values:  'int'
+# Flag:    --ip_timeout
+public_ip_timeout=2
+
+
+# Desktop Environment
+
+
+# Show Desktop Environment version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --de_version
+de_version="on"
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir', 'none'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+#
+# none:   'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+disk_subtitle="mount"
+
+# Disk percent.
+# Show/Hide disk percent.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --disk_percent
+#
+# Example:
+# on:  'Disk (/): 74G / 118G (66%)'
+# off: 'Disk (/): 74G / 118G'
+disk_percent="on"
+
+
+# Song
+
+
+# Manually specify a music player.
+#
+# Default: 'auto'
+# Values:  'auto', 'player-name'
+# Flag:    --music_player
+#
+# Available values for 'player-name':
+#
+# amarok
+# audacious
+# banshee
+# bluemindo
+# clementine
+# cmus
+# deadbeef
+# deepin-music
+# dragon
+# elisa
+# exaile
+# gnome-music
+# gmusicbrowser
+# gogglesmm
+# guayadeque
+# io.elementary.music
+# iTunes
+# juk
+# lollypop
+# mocp
+# mopidy
+# mpd
+# muine
+# netease-cloud-music
+# olivia
+# playerctl
+# pogo
+# pragha
+# qmmp
+# quodlibet
+# rhythmbox
+# sayonara
+# smplayer
+# spotify
+# strawberry
+# tauonmb
+# tomahawk
+# vlc
+# xmms2d
+# xnoise
+# yarock
+music_player="auto"
+
+# Format to display song information.
+#
+# Default: '%artist% - %album% - %title%'
+# Values:  '%artist%', '%album%', '%title%'
+# Flag:    --song_format
+#
+# Example:
+# default: 'Song: Jet - Get Born - Sgt Major'
+song_format="%artist% - %album% - %title%"
+
+# Print the Artist, Album and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Album: Costello Music'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
+song_shorthand="off"
+
+# 'mpc' arguments (specify a host, password etc).
+#
+# Default:  ''
+# Example: mpc_args=(-h HOST -P PASSWORD)
+mpc_args=()
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(distro)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Info Separator
+# Replace the default separator with the specified string.
+#
+# Default:  ':'
+# Flag:     --separator
+#
+# Example:
+# separator="->":   'Shell-> bash'
+# separator=" =":   'WM = dwm'
+separator=":"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '15'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+block_range=(0 15)
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+# Color Alignment
+#
+# Default: 'auto'
+# Values: 'auto', 'num'
+# Flag: --col_offset
+#
+# Number specifies how far from the left side of the terminal (in spaces) to
+# begin printing the columns, in case you want to e.g. center them under your
+# text.
+# Example:
+# col_offset="auto" - Default behavior of neofetch
+# col_offset=7      - Leave 7 spaces then print the colors
+col_offset="auto"
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --cpu_display
+#          --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+cpu_display="off"
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'chafa', 'jp2a', 'iterm2', 'off',
+#           'pot', 'termpix', 'pixterm', 'tycat', 'w3m', 'kitty'
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+#           'command output (neofetch --ascii "$(fortune | cowsay -W 30)")'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+# NOTE: AIX, Alpine, Anarchy, Android, Antergos, antiX, "AOSC OS",
+#       "AOSC OS/Retro", Apricity, ArcoLinux, ArchBox, ARCHlabs,
+#       ArchStrike, XFerience, ArchMerge, Arch, Artix, Arya, Bedrock,
+#       Bitrig, BlackArch, BLAG, BlankOn, BlueLight, bonsai, BSD,
+#       BunsenLabs, Calculate, Carbs, CentOS, Chakra, ChaletOS,
+#       Chapeau, Chrom*, Cleanjaro, ClearOS, Clear_Linux, Clover,
+#       Condres, Container_Linux, CRUX, Cucumber, Debian, Deepin,
+#       DesaOS, Devuan, DracOS, DarkOs, DragonFly, Drauger, Elementary,
+#       EndeavourOS, Endless, EuroLinux, Exherbo, Fedora, Feren, FreeBSD,
+#       FreeMiNT, Frugalware, Funtoo, GalliumOS, Garuda, Gentoo, Pentoo,
+#       gNewSense, GNOME, GNU, GoboLinux, Grombyang, Guix, Haiku, Huayra,
+#       Hyperbola, janus, Kali, KaOS, KDE_neon, Kibojoe, Kogaion,
+#       Korora, KSLinux, Kubuntu, LEDE, LFS, Linux_Lite,
+#       LMDE, Lubuntu, Lunar, macos, Mageia, MagpieOS, Mandriva,
+#       Manjaro, Maui, Mer, Minix, LinuxMint, MX_Linux, Namib,
+#       Neptune, NetBSD, Netrunner, Nitrux, NixOS, Nurunner,
+#       NuTyX, OBRevenge, OpenBSD, openEuler, OpenIndiana, openmamba,
+#       OpenMandriva, OpenStage, OpenWrt, osmc, Oracle, OS Elbrus, PacBSD,
+#       Parabola, Pardus, Parrot, Parsix, TrueOS, PCLinuxOS, Peppermint,
+#       popos, Porteus, PostMarketOS, Proxmox, Puppy, PureOS, Qubes, Radix,
+#       Raspbian, Reborn_OS, Redstar, Redcore, Redhat, Refracted_Devuan,
+#       Regata, Rosa, sabotage, Sabayon, Sailfish, SalentOS, Scientific,
+#       Septor, SereneLinux, SharkLinux, Siduction, Slackware, SliTaz,
+#       SmartOS, Solus, Source_Mage, Sparky, Star, SteamOS, SunOS,
+#       openSUSE_Leap, openSUSE_Tumbleweed, openSUSE, SwagArch, Tails,
+#       Trisquel, Ubuntu-Budgie, Ubuntu-GNOME, Ubuntu-MATE, Ubuntu-Studio,
+#       Ubuntu, Venom, Void, Obarun, windows10, Windows7, Xubuntu, Zorin,
+#       and IRIX have ascii logos
+# NOTE: Arch, Ubuntu, Redhat, and Dragonfly have 'old' logo variants.
+#       Use '{distro name}_old' to use the old logos.
+# NOTE: Ubuntu has flavor variants.
+#       Change this to Lubuntu, Kubuntu, Xubuntu, Ubuntu-GNOME,
+#       Ubuntu-Studio, Ubuntu-Mate  or Ubuntu-Budgie to use the flavors.
+# NOTE: Arcolinux, Dragonfly, Fedora, Alpine, Arch, Ubuntu,
+#       CRUX, Debian, Gentoo, FreeBSD, Mac, NixOS, OpenBSD, android,
+#       Antrix, CentOS, Cleanjaro, ElementaryOS, GUIX, Hyperbola,
+#       Manjaro, MXLinux, NetBSD, Parabola, POP_OS, PureOS,
+#       Slackware, SunOS, LinuxLite, OpenSUSE, Raspbian,
+#       postmarketOS, and Void have a smaller logo variant.
+#       Use '{distro name}_small' to use the small variants.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(distro)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="on"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Gap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Misc Options
+
+# Stdout mode
+# Turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'off'
+# Values: 'on', 'off'
+stdout="off"